pokušao sam ubacivati po ovoj shemi...... NEC DataBase Tool 2.0
prvo resiver spoji sa PC rs kablom I sada resiver
ustekaj u struju.Resiver mora biti ugasen
Klikni APP2.EXE, I otvori se
NEC DataBase Tool 2.0
2. Klikni , I otvori se
klikni Start upali resiver na gumbu treba ti se pojaviti loader version 081204
klikni EXIT.
Iskljuci resiver na prednjem (zadnjem) gumbu
Ako je ovo proslo znac da imate vezu sa resiverom ostalo dalje nebi trbalo biti problem
3.Ubacivanje softvera Klikni , otvori se
Podesi COM port, obicno je com1
Otvori image file I nadi sw koji ces ubaciti u resiver narvno raspakiran
Zadnj sw “ver081204_21Feb08” kad sam pisao ovo
klikni Start
Otvoriti ce se PROGRAM IMAGE UPDATE
I pisat ce Connecting to Target…
UPALI RESIVER NA PREDNJEM (zadnjem) GUMBU I PROCES KRECE
Traje par minuta ne dirati nista na displeju se vrte brojevi
Pricekat dok se ne pojavi gornja slika
Program Image Update
4. DVB. Put the DVB on the upgrade condition (MainMenu/installtion/transfer/transfer program+data), click , you will find:
Press Start, the computer will get the date from the receiver and save the file in a target place after the procession is finished:
5. Edit the date file. Click , open the date file which you save on step 4, then edit the data file, and save the file as other BIN file on a target place.
6. Load the date file, click , and select the BIIN file which you save on step 5:
Press Start, and power off/ on the receiver, you will find:
After finish the procession, restart the receiver, and renew the factory setting operation, the new data can be used now.
7. Please load newest SOFTCAM.KEY from internet
Press on above file:
select SOFTCAM.KEY file in ‘key file’ and input the name in ‘Img File’ and save this img file in a target place you want, then press transfer, you will get a img file.
8. Load img file into DVB, Press to select the IMG file which you save in step 7,:
Press Start, and power off/ on the receiver, you will find:
Then the key file will be loaded in to DVB successfully!
9. The relevant information, click , you will find the tool information but you cann’t modify them.
.....dođem do točke 4. i dalje neće.........