EMUNATION rev 939.6
Fixed a lil error I introduced into map3e while fixing map46.
Configurable priorities, see 938.7 below, fixed to now work
with multiple system ids.
Providers.conf never worked right and support
has been dropped.
Radegast and newcamd cardclients fixed. Sample
.conf file added.
New [SC] ini entry CCDump turns on/off raw data
dumps to console for cardclient and smartcard.
ST19Com and ST19Echo settings activated in ini.
Set ST19Com to nonexistant port if the smartcard
interface is not in use. You can ignore
the Com port opening error if not in use.
Be sure you have a Nagra3=-15 or something
, as there are n3 stubs that show as a valid
protocol (wishful thinking).
N3 ca-ids are valid for cardsharing,
if supported by your server.
Be careful of unintended consequences,
on gc irdeto is sometimes a valid protocol,
but i bet you don't have valid keys.
Check your ini against the distribution file.
All priorities are negative numbers.
-3 is higher than -5.
No number may be less -20 nor higher than -1.
You can change between smartcard,
cardclient and native code
on the fly by inserting/removing
card and retuning the channel,
if priorities are set appropriately.
You can not change priorities on the fly.
Finally, before you say cardclient
doesn't work, check your firewall settings.