Evo kako instalirati E2 na BA stick:
1.Format usb disk with "HP USB Boot Utility" name is "XBA" no quotes .
2.Insatall these version via usb in this order:
A---Original_1.05_Notfallimage
B---Kathrein1.06_2Bootloader
C---AAF2.0d_1w_2Bootloader
3.Again format usb disk with "HP USB Boot Utility" name is "XBA" no quotes.
4.Connect USB disk to Kathy .
5.Check that you have communication with it - I reccomend go to AAF menu and turn DHCP ON
6.Put kathy in Date mode - :"Menu->Settings->Time and Date"
7.Start KCC click on "Test Connection" and see if you get 4 "ok" messages .
8.Now click on the "Barry Allen " tab and choose "Install BA" ,
Now choose the file "barry-allen-UFS-910-5.3.6_GOst.tar.gz" its inside KCC folder .
Keep the :"Install BA Using Network... " checked and tick the :"Split Memory Stick ".
After that click on :"Install Bootmenu" and choose :"baboot_v0.6.tar.gz" that also in KCC
9.Now reboot Kathy - If not KCC will crash on the next step,and you will do it anyway
Start KCC again after kathy is back and go to the "Barry Allen" tab again ,
Now "Right-Click" the main white window and choose :"Install Image In Partition"
Choose :"e2-kf-317-usb.tar" from the file you downloaded ,at this stage choose partition
Set the :"Partition = /dev/sda4 ,
Then set all IPs, Please note they are all different !!!
10.Now click on :"Activate 2nd Bootloader" and approve the message .
* You have to go back here and "Deactivate it" if you plan to install other Image
In the future .
Thats it reboot kathey choose e2-kf-317-usb from the boot menu , and wait about 2-3 min .
download package:
http://rapidshare.com/files/155956094/E2onKathy_by_Viper.rar.html