VLADIX SAT forum
Satelitski recieveri => Dreambox => Problemi i pomoć => Temu započeo: Maverick 12.11.2008. 21:34:27
-
Vjerojatno ste primjetili da gbox zablesavi ako prebacite na neki od kanala s premiera od kada u premiere počele koristiti nds. I isto tako premiere ne idu preko gboxa.
Rješenje: izbrisati iz var/keys fileove irdeto,nagra2 i nagra.txt, restartati box, premiere će proradit, i neće više blesat gbox ;)
-
e koji je sada provider za premiere ?
i koji je caid za nagru 3 inace ?
-
Premiere ima idente 1833 i 09C4
1833 je pure nagra, a ja karticu sa takvim ID-om nisam vidio na gboxu
Nagra3 kartica se tunnelira kroz Betacrypt (1702:0000) i taj je ID za nagra3 za sada. Radi sve osim HD kanala, koji rade bez problema na nds-u i gboxu (ali homebox me ograničava).
HD kanali u nagra3 rade u cccamu sa najnovijim newcs-om+mpcs 0.9+cccam 2.0.10
-
cekaj :D nisam skontao znaci ide i preko Betacrypa i ovo mu je ident 1702:0000, kao i preko nagre s identom 1833, a videogard je 09C4 jesam li te uhvatio :D
-
kod mene nece premiere s gboxom sta treba uradit ? ovo sto je vidak rekao kod mene nema folder var/keys jer ja gledam preko sky star 2 i nema kod mene u folderu gbox nigdje txt dokumenata irdeto,nagra2 i nagra ???
-
e ja sam to rekao za dream, ali kod tebe bi meni se čini trebalo samo izmjenit ident i ignore liste.
-
moze li ova sta pomoci da probam Gbox 02.11.08 GLOBAL_IdentIgnore_lists_by_MirrrEnoSat
-
nista ne radi i dalje
-
Imaš li možda softcam u direktoriju za gbox?
-
imam
evo sta je u njemu
# SoftCam EMM Log configuration
#
# Save EMM data
# 00 Don't save anything (default)
# 01 Save processed EMMs (/var/tmp/emmproc.bin)
# 02 Save rejected EMMs (/var/tmp/emmblock.bin)
# 03 Save both EMMs
L: { 00 }
# Check additional OSC Frequency !!! ONLY FOR DBOX2 !!!
# 00 No Check (default)
# >0 Check on, Value in KHz , example 8MHz=08000
F: { 0000 }
# Check additional Baurate for ATR !!! ONLY FOR DBOX2 !!!
# 00 No Check (default)
# >0 Check on, Value in bit/s, example 81861
B: { 0000 }
# Enable TPScrypt Support
# *0 TPScrypt off
# *1 TPScrypt on (default)
# 1* don't use PTS on Viaccess cards
# 2* don't use PTS on Cryptoworks cards
# 3* don't use PTS on Viaccess and Cryptoworks cards
Y: { 01 }
# Empty RS232 buffer before writing
# 00 No reset
# 01 Reset Buffer (default)
E: { 01 }
# SoftCam Blocker/Filter definition
#
# 00 = Allow EMM (default for all)
# 01 = Block EMM addressed to:
# all card
# | shared address/provider
# | | unique address/hex_serial
# ----------------------------------
I: { 00 00 00 } Irdeto All SA UA
V: { 00 00 00 } Via - SA UA
S: { 00 00 00 } Seca - SA UA
N: { 00 00 00 } Nagra All SA UA
C: { 00 00 00 } Crypto All SA UA
O: { 00 00 00 } Conax - SA UA
D: { 00 00 00 } NDS All SA UA
# Timeout Definitions
#
T: { 00 02 01 } ATR timeout (normal*X), instruction timeout (normal*X)
# com1/com2 delays, all delays to be entered in decimal !
#
# Do NOT touch !!!!!!!!!!!!!!!!!!
# all timings should be 0, change only if you have problems.
T: { 01 00000 000 } Irdeto : byte delay (1e-6 s), instruction delay (1e-3 s)
T: { 02 00000 000 } Seca
T: { 03 00000 000 } Viaccess
T: { 04 00000 000 } Nagra
T: { 05 00000 000 } CryptoWorks
T: { 06 00000 000 } Geldkarte
T: { 07 00000 000 } Conax
T: { 08 00000 000 } NDS
T: { 09 00500 000 } Dreamcrypt/Firecrypt
# Use Crypto card bug to decode any CW, no matter of chid
#
# Cxxx configuration (is aktiv for the provider only if a config line is present)
# (ECM sample to be used to get the cw's with Cxxx)
#
# Provider provider chid - that is present on the card for that provider
# || || || ||
# UPC-Astra
8: { 8D } A4 4C 00 00 2E 20 00 2B 83 01 8D 8C 03 20 01 00 8E 02 00 00 C5 01 00 DB 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DF 08 00 00 00 00 00 00 00 00
# Digiturk
8: { C1 } A4 4C 00 00 31 28 00 2E 83 01 C1 8C 03 89 19 19 8E 02 00 00 8F 01 A9 91 01 55 DB 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DF 08 00 00 00 00 00 00 00 00
# Use constant CW's for
# sid CW0 ... CW1 ...
#0: { 01 62 00 00 { 00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF }
# Use emu for sharing (do use ONLY for np key or tpscrypt or similar)
#
# Will simulate 007C00 as card in slot1
#M: { 01 { 05 00 7C 00 }}
# Will simulate 4801 as card in a sc8in1 on com2 slot2
#M: { 0C { 18 01 48 01 }}
-
nakon ubacivaja ignore liste i identa od gbox 2.25 a ja koristim 1.9b radi sad sve osim direkt kanala ??? a radi njih i gledam premiere :'(
-
direkti ne rade ni kod mene :'(
-
evo uradio sam i ja kako si napisao sad ne blesa dreambox,hvala, ;D ;D ;D
-
premiere direct mogu da gledam mada i u mene piše (removed service) samo znači neznam kako se zove jeli direct 1 il 2 ali mogu da gledam